VOLVO
BCM-C111486 - Inclination sensor. Bus/message error. Invalid signal
Układ
Sterownik układu hamulcowego (BCM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
1 modelXC90 (2003–)
Co oznacza ten kod błędu?
One of the sensors in the AYC sensor has an incorrect offset value, meaning the correction that compensates for the sensor's own deviation. This most often means the sensor is fitted incorrectly or its bracket is damaged. The code only applies to cars with DSTC.
Możliwe przyczyny
- AYC sensor incorrectly fitted
- Loose AYC sensor
- Bent bracket for the AYC sensor
- Internal fault in the AYC sensor
Co możesz zrobić
- 1Check that the AYC sensor is firmly secured and correctly fitted to the bracket under the front passenger seat
- 2Make sure the bracket is not bent or otherwise damaged
- 3Correct any faults in the fitting and clear the code
- 4The brake and stability systems are safety-critical, so have a workshop carry out any work on the sensor and the module
Objawy, które możesz zauważyć4
- General warning lamp on
- Traction control does not work
- Stability function does not work
- Anti-skid function does not work
Na co może wpływać usterka2
- Traction control, stability control and dynamic stability control (AYC) are disabled
- Roll stability control (RSC) is disabled on cars that have it
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.