Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    BCM-U002888
    VOLVO

    BCM-U002888 - Vehicle Communication Bus A. Bus Signal / Message Failures. Bus off

    Układ

    Sterownik układu hamulcowego (BCM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    6 modeli

    S60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), XC60 (2009–)

    Pokaż modele wg rocznika i silnika (6)
    • Volvo S60 (2011–)2011–2015
    • Volvo V40 (2013–)2013–2015
    • Volvo V40 Cross Country (2013–)2013–2015
    • Volvo V60 (2011–)2011–2015
    • Volvo V60 Cross Country (2015–)2015
    • Volvo XC60 (2009–)2013–2015

    Co oznacza ten kod błędu?

    The brake control module (BCM) has lost contact with the airbag system's main unit (SRS) on the local sensor network and has therefore shut down its communication on that network. The fault means incorrect messages are being sent or received between the BCM and the SRS. The cause is most often a short in the wiring, and the code points to starting the troubleshooting in the module that transmits.

    Możliwe przyczyny

    • Short circuit to battery supply
    • Short circuit to ground
    • Fault in the module transmitting incorrect messages

    Co możesz zrobić

    1. 1Check the wiring on the local sensor network for shorts to supply voltage and to ground
    2. 2Check the communication between the airbag system's main unit, the crash speed module and the passenger weight sensor where fitted
    3. 3If no fault is found in the wiring, have a workshop troubleshoot the crash speed module with diagnostic equipment
    4. 4The airbag and brake systems are safety-critical, so do not work on them yourself and have a workshop carry out all work on the wiring and the modules

    Objawy, które możesz zauważyć5

    • Traction control warning lamp lit
    • Stability function does not work
    • Traction control does not work
    • Anti-skid function does not work
    • Adaptive cruise control and collision and brake support do not work

    Na co może wpływać usterka1

    • The brake control module shuts down communication on the local sensor network

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.