VOLVO
BCM-U030046 - Control module incompatible internal software. Internal error. Defective calibration / parameter memory
Układ
Sterownik układu hamulcowego (BCM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
1 modelXC90 (2003–)
Co oznacza ten kod błędu?
The brake control module (BCM) has not received the signal from the central electronic module (CEM) that contains the vehicle model information. The code is set when the signal is missing after the ignition is switched on, and most often means a module from another vehicle model has been fitted. The code only applies to cars with DSTC.
Możliwe przyczyny
- A brake control module from another vehicle model has been fitted
- A central electronic module from another vehicle model has been fitted
Co możesz zrobić
- 1Read codes in the central electronic module and troubleshoot them first
- 2Check that the correct brake control module and central electronic module for this vehicle model are fitted
- 3Check the CAN wiring between the brake control module and the central electronic module for breaks, shorts to ground and shorts to supply voltage
- 4Check the connectors on the two modules for contact resistance and oxidation
- 5The brake and stability systems are safety-critical, so have a workshop carry out any work on the modules
Objawy, które możesz zauważyć4
- General warning lamp on
- Anti-skid function does not work
- Stability function does not work
- Traction control does not work
Na co może wpływać usterka1
- Traction control, stability control and dynamic stability control (AYC) are disabled
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.