VOLVO
BCM-U030051 - Internal Control Module Software Incompatibility. System Programming Failures. Not programmed
Układ
Sterownik układu hamulcowego (BCM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
13 modeliC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (14)
- Volvo C30 (2007–2013)2011–2013Tylko silnik: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Tylko silnik: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Wszystkie silniki oprócz: B5254T7
- Volvo S40 (2004–2013)2011–2012Tylko silnik: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V50 (2004–2013)2011–2012Tylko silnik: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2015
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
Co oznacza ten kod błędu?
The brake control module (BCM) is supplied by the manufacturer with special software used at the factory to fill the brake system with hydraulic fluid. After the module is fitted in the car, that software must be overwritten with the correct software. The code is set if this has not been done, and the flashing warning lamps show that the system is not ready.
Możliwe przyczyny
- Incorrect software has been downloaded to the module, because the supplier's software has not been overwritten
Co możesz zrobić
- 1Have a workshop read the code and confirm that incorrect software has been downloaded
- 2Reprogram the brake control module with the latest software following the workshop procedure
- 3After programming, check that the warning lamps go out and that the code is not set again
- 4The brake system is safety-critical, so have a workshop carry out all programming and checks of the brake system
Objawy, które możesz zauważyć3
- ABS and traction control lamps flashing
- ABS warning lamp shows a fault
- Traction and anti-skid warning lamp shows a fault
Na co może wpływać usterka2
- Locking-free brakes are disabled, as ABS is blocked
- Electronic brake force distribution is disabled
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.