VOLVO
BCM-U042268 - Invalid Data Received From Central electronic module. Algorithm Based Failures. Event information
Układ
Sterownik układu hamulcowego (BCM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
7 modeliS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Co oznacza ten kod błędu?
The brake control module (BCM) continuously receives the information it needs from the central electronic module (CEM) over CAN and checks its quality. The code is set when the CEM reports a lower quality level than the brake module accepts. Front monitoring, adaptive cruise control and collision warning with brake support may then work poorly or not at all.
Możliwe przyczyny
- Fault in the central electronic module (CEM), which sends information of too low quality
Co możesz zrobić
- 1Read codes in the central electronic module and troubleshoot them first, as the fault lies there
- 2This code can only be cleared once the root fault has been corrected and its own code has been cleared
- 3Check that adaptive cruise control and collision warning work after the repair
- 4The brake system is safety-critical, so have a workshop carry out any work on the central electronic module and the brake control module
Objawy, które możesz zauważyć3
- Adaptive cruise control does not work
- Front monitoring and active safety do not work
- Collision warning with brake support does not work
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.