VOLVO
BCM-U045241 - Invalid Data Received From Restraints Control Module. System Internal Failures. General checksum failure
Układ
Sterownik układu hamulcowego (BCM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
6 modeliS60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), XC60 (2009–)
Co oznacza ten kod błędu?
The brake control module (BCM) has received faulty data from the airbag system's control module on the sensor CAN network, and communication with the airbag system is disturbed. The code points to a fault in the airbag system. There is no separate troubleshooting procedure for this code, so the root fault must be found there.
Możliwe przyczyny
- Fault in the airbag system, which is the sending module
Co możesz zrobić
- 1Read codes in the airbag system's main unit and troubleshoot them first, as this code follows the fault there
- 2This code can only be cleared once the root fault has been corrected and its own code has been cleared
- 3Check that the stability and cruise control functions work after the repair
- 4The airbag and brake systems are safety-critical, so do not work on them yourself and have a workshop carry out all work
Objawy, które możesz zauważyć5
- Traction control warning lamp lit
- Stability function does not work
- Traction control does not work
- Anti-skid function does not work
- Adaptive cruise control does not work
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.