VOLVO
BCM-U1A1400 - CAN Initialisation Failure. General Failure Information. No sub type information
Układ
Sterownik układu hamulcowego (BCM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
13 modeliC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (14)
- Volvo C30 (2007–2013)2011–2013Tylko silnik: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Tylko silnik: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Wszystkie silniki oprócz: B5254T7
- Volvo S40 (2004–2013)2011–2012Tylko silnik: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V50 (2004–2013)2011–2012Tylko silnik: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2015
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
Co oznacza ten kod błędu?
The brake control module (BCM) monitors its own functions and components with software. The code is set when that software has not started correctly. The fault indicates incorrect software, and it may be temporary if the code does not return after it is cleared.
Możliwe przyczyny
- Incorrect software in the brake control module
Co możesz zrobić
- 1Clear the code and read it out again to see whether the fault was temporary
- 2If the code returns, have a workshop reload the software in the brake control module and repeat the troubleshooting with a new clear and read
- 3Check that the warning lamps go out after reprogramming
- 4The brake system is safety-critical, so have a workshop carry out all programming and any intervention
Objawy, które możesz zauważyć5
- ABS warning lamp lit
- Brake circuit warning lamp lit
- Traction control warning lamp lit
- Stability function does not work
- Traction control does not work
Na co może wpływać usterka3
- Locking-free brakes are disabled
- Stability control and traction control are disabled
- Dynamic stability control (AYC) is disabled
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.