VOLVO
BCM-U200746 - Valve(s). System Internal Failures. Calibration / parameter memory failure
Układ
Sterownik układu hamulcowego (BCM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
13 modeliC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (14)
- Volvo C30 (2007–2013)2011–2013Tylko silnik: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Tylko silnik: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Wszystkie silniki oprócz: B5254T7
- Volvo S40 (2004–2013)2011–2012Tylko silnik: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V50 (2004–2013)2011–2012Tylko silnik: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2015
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
Co oznacza ten kod błędu?
The brake control module (BCM) with its hydraulic unit is supplied calibrated from the factory. The code is set when the calibration for the analogue hydraulic valves is missing or when the calibration data does not match.
Możliwe przyczyny
- Calibration of the brake control module is missing
- Internal fault in the brake control module
- Damaged brake control module
Co możesz zrobić
- 1Read codes in the central electronic module first, as the fault may lie there
- 2Have a workshop download the software again following the workshop procedure, then check that the code is not set again
- 3If the fault returns, have a workshop replace the brake control module and calibrate it
- 4The brake system is safety-critical, so have a workshop carry out all programming and any replacement
Objawy, które możesz zauważyć5
- ABS warning lamp lit
- General warning lamp on
- Stability function does not work
- Traction control does not work
- Anti-skid function does not work
Na co może wpływać usterka2
- Stability control and traction control are disabled
- Dynamic stability control (AYC) is disabled
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.