VOLVO
BCM-U210800 - Adaptive Cruise Control. General Failure Information. No sub type information
Układ
Sterownik układu hamulcowego (BCM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Co oznacza ten kod błędu?
When adaptive cruise control is active, the function may request a gentle braking action from the brake control module, and the module checks that the engine management has registered the driver braking. The code is set when cruise control has requested gentle braking even though the speed was above the limit. The fault points to another module.
Możliwe przyczyny
- Fault in the engine control module (ECM)
- Fault in the front monitoring module (FSM)
Co możesz zrobić
- 1Read codes in the engine control module and in the front monitoring module and troubleshoot them first
- 2This code can only be cleared once the root fault has been corrected and its own code has been cleared
- 3Check that cruise control works normally after a road test
- 4The brake system is safety-critical, so have a workshop carry out any work on the engine management and the brake control module
Objawy, które możesz zauważyć2
- Adaptive cruise control does not work
- Cruise control will not engage
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.