VOLVO
BCM-U300048 - Control Module. System Internal Failures. Supervision software failure
Układ
Sterownik układu hamulcowego (BCM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
6 modeliC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013)
Pokaż modele wg rocznika i silnika (7)
- Volvo C30 (2007–2013)2011–2013Tylko silnik: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Tylko silnik: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Wszystkie silniki oprócz: B5254T7
- Volvo S40 (2004–2013)2011–2012Tylko silnik: D4162T, D5204T, D5204T5
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V50 (2004–2013)2011–2012Tylko silnik: D4162T, D5204T, D5204T5
Co oznacza ten kod błędu?
The brake control module (BCM) has registered an internal fault in its monitoring software. The fault lies in the module, which then sends a message to the other modules on the car's network that its information is incorrect. The code is set at ignition on.
Możliwe przyczyny
- Internal fault in the brake control module
Co możesz zrobić
- 1Check that the fuses for the brake system are intact; their locations are in the owner's manual or on the fuse box cover
- 2Where possible, check the relevant functions using the switches, controls and a road test
- 3Read the codes and have a workshop troubleshoot them according to the accompanying information with diagnostic equipment
- 4The brake system is safety-critical, so have a workshop carry out any intervention in the brake control module
Objawy, które możesz zauważyć5
- Information lamp lit
- Traction control warning lamp lit
- Traction control does not work
- Stability function does not work
- Yellow warning symbol and text message in the display
Na co może wpływać usterka1
- The BCM notifies the other nodes on CAN that the data it provides is wrong
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.