VOLVO
BCM-U300317 - Battery Voltage. General Electrical Failures. Circuit voltage above threshold
Układ
Sterownik układu hamulcowego (BCM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
13 modeliC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (14)
- Volvo C30 (2007–2013)2011–2013Tylko silnik: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Tylko silnik: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Wszystkie silniki oprócz: B5254T7
- Volvo S40 (2004–2013)2011–2012Tylko silnik: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V50 (2004–2013)2011–2012Tylko silnik: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2015
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
Co oznacza ten kod błędu?
The brake control module (BCM) measures the battery voltage and sets the code when it is too high. The fault normally lies in the charging system, and the electronic brake functions may be switched off for as long as the fault remains.
Możliwe przyczyny
- Fault in the charging system
Co możesz zrobić
- 1First have a workshop check the central electronic module and the generator with diagnostic equipment
- 2Start the engine and let it idle; the voltage should be normal system voltage
- 3If the voltage is too high, have a workshop check the charging system and the battery
- 4The brake system is safety-critical, so have a workshop carry out any work on the charging system and the brake control module
Objawy, które możesz zauważyć5
- ABS warning lamp lit
- Brake circuit warning lamp lit
- Traction control warning lamp lit
- Stability function does not work
- Traction control does not work
Na co może wpływać usterka3
- Stability control is disabled
- Traction control is disabled
- Dynamic stability control (AYC) is disabled
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.