VOLVO
BECM-C103D00 - Hybrid/EV Battery Pack Sensor Module "G". General Failure Information. No sub type information
Układ
Sterownik akumulatora trakcyjnego (BECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
1 modelV60 (2011–)
Pokaż modele wg rocznika i silnika (2)
Co oznacza ten kod błędu?
The battery energy control module (BECM) in the plug-in hybrid has registered an internal fault in the control unit for module G, or a disturbance in its communication with the BECM. Each module in the high-voltage battery has its own voltage and temperature sensors. The fault can only be detected while the car runs on electric power or is charging, and it may be intermittent.
Możliwe przyczyny
- Damage to the high-voltage battery, for example in the module's control unit or its connections
Co możesz zrobić
- 1Read codes in the battery energy control module and in other affected modules first
- 2Do not clear the code until a workshop has found the cause, as it may return
- 3Avoid charging until the fault has been investigated
- 4High-voltage systems may only be handled by qualified personnel, so never work on the battery yourself
Objawy, które możesz zauważyć4
- Red symbol and message in the display
- The high-voltage battery charges poorly or not at all
- Drive modes PURE, SAVE and AWD are not available
- The combustion engine runs all the time or often
Na co może wpływać usterka2
- The high-voltage battery cannot be charged
- Electric drive is not possible
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.