Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    BECM-C106E00
    VOLVO

    BECM-C106E00 - Battery Charging Crash Detect IMPACT DETECTED. General Failure Information. No sub type information

    Układ

    Sterownik akumulatora trakcyjnego (BECM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    1 model

    V60 (2011–)

    Pokaż modele wg rocznika i silnika (2)
    • Volvo V60 (2011–)2013–2014Tylko silnik: D82PHEV
    • Volvo V60 (2011–)2015Tylko silnik: D82PHEV, D87PHEV

    Co oznacza ten kod błędu?

    The BECM has received a crash event signal from the supplemental restraint system or the central electronic module (CEM). The code means that one of the incoming signals indicates that a collision has taken place. It is a consequential fault of a fault in the control module that sent the signal.

    Możliwe przyczyny

    • An impact signal arrives from the supplemental restraint system (SRS)
    • An impact signal arrives from the central electronic module (CEM)
    • The fault in the supplemental restraint system (SRS) needs to be investigated
    • The fault in the central electronic module (CEM) needs to be investigated

    Co możesz zrobić

    1. 1Start by reading fault codes in the supplemental restraint system (SRS) and the central electronic module (CEM)
    2. 2Troubleshoot the control module that sent the signal, since the fault lies there
    3. 3Do not clear this code until the fault in the sending control module has been remedied
    4. 4Do not work on the airbag system yourself, have a workshop carry out the fault finding
    5. 5The high voltage system should only be handled by qualified personnel, so have a workshop carry out all work on the battery and other high voltage parts

    Objawy, które możesz zauważyć4

    • Red warning symbol and message in the display
    • Charging of the high voltage battery stops or works poorly, especially while driving
    • Drive modes PURE, SAVE and AWD disengage automatically or cannot be selected
    • Low voltage in the battery or a dead battery

    Na co może wpływać usterka2

    • Electric propulsion is not possible
    • The high voltage battery cannot be charged

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.