VOLVO
BECM-P0A9500 - High Voltage Fuse. General Failure Information. No sub type information
Układ
Sterownik akumulatora trakcyjnego (BECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
1 modelV60 (2011–)
Pokaż modele wg rocznika i silnika (2)
Co oznacza ten kod błędu?
This code concerns the fuse of the high voltage system. The BECM monitors the safety circuits in the system, and the fault may be that the manual service disconnect is loose, not connected or damaged, or that the high voltage cable or one of the connected modules is damaged.
Możliwe przyczyny
- The manual service disconnect (MSD) sits loose or is unplugged
- The manual service disconnect (MSD) is damaged
- The base for the manual service disconnect (MSD) is damaged
- The high voltage cable is damaged
- The Inverter System Controller (ISC) is damaged
- The Air Conditioning Compressor Module (ACCM) is damaged
Co możesz zrobić
- 1Read and note the fault code, clear it and road test to check whether it returns
- 2Have a workshop check visible damage to the high voltage cable sheathing, such as chafing or pinch marks
- 3Have a workshop check that the manual service disconnect is fully in place and undamaged
- 4The high voltage system should only be handled by qualified personnel, so have a workshop carry out all work on the battery and other high voltage parts
Objawy, które możesz zauważyć4
- Red warning symbol and message in the display
- Charging of the high voltage battery stops or works poorly
- Drive modes PURE, SAVE and AWD disengage automatically or cannot be selected
- The combustion engine runs more often than normal in HYBRID mode
Na co może wpływać usterka2
- The high voltage battery cannot be charged
- Electric propulsion is not possible
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.