VOLVO
BECM-P0AC100 - Hybrid/EV Battery Pack Current Sensor "A" Circuit Low. General Failure Information. No sub type information
Układ
Sterownik akumulatora trakcyjnego (BECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
1 modelV60 (2011–)
Pokaż modele wg rocznika i silnika (2)
Co oznacza ten kod błędu?
The BECM measures the total current in the high voltage battery with two internal current sensors, and one sensor is used to check the other. The code is set when at least one of the sensors gives a faulty value. The fault concerns current sensor A. The signal from it is too low
Możliwe przyczyny
- The high voltage battery is damaged
Co możesz zrobić
- 1Read and note the fault code, clear it and road test to check whether it returns
- 2Has the car recently been to a workshop or had work done on the high voltage parts?
- 3Have a workshop with diagnostic equipment check the current sensors in the high voltage battery
- 4The high voltage system should only be handled by qualified personnel, so have a workshop carry out all work on the battery and other high voltage parts
Objawy, które możesz zauważyć1
- No noticeable symptoms for the driver
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.