Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    CCM-000B
    VOLVO

    CCM-000B - Left temperature damper motor. Signal too low

    Układ

    Sterownik klimatyzacji (CCM)

    Modele Volvo, których dotyczy ten kod błędu

    Ten kod błędu ma różne znaczenie w zależności od modelu, rocznika lub silnika. Wybierz znaczenie, które dotyczy Twojego samochodu.

    Dotyczy następujących modeli:

    5 modeli

    S60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

    Pokaż modele wg rocznika i silnika (5)
    • Volvo S60 (2001–2009)2001–2004
    • Volvo S80 (1999–2006)1999–2004
    • Volvo V70 (2000–2008)2000–2004
    • Volvo V70 XC / XC70 (2001–2007)2001–2004
    • Volvo XC90 (2003–)2003–2004

    Co oznacza ten kod błędu?

    The control module has received too weak a signal from the temperature damper motor on the driver side. The damper controls how much warm and cold air enters the left side of the cabin, so that side may get the wrong temperature or ignore the control.

    Możliwe przyczyny

    • Signal wire linking the control module to the damper motor shorted to live voltage
    • Open circuit in the signal wire linking the control module to the damper motor
    • Contact resistance, oxidation or play in the connectors
    • Defective damper motor

    Co możesz zrobić

    1. 1With the engine running and the blower on, turn the left-hand control from max to min and check that the air on the left side changes temperature
    2. 2Check which type of climate control the car has (electronic, ECC, or manual, MCC/STD) before going further
    3. 3Check the connectors at the left and right temperature damper motors for loose contacts and damage
    4. 4Check the wiring between the left and right temperature damper motors for chafing and crushed areas
    5. 5If the connectors and wiring are in order but the fault remains, have a workshop check the signal wire and replace the damper motor if needed
    6. 6If you have a diagnostic tool, follow the damper position in live data while turning the control and check that it changes smoothly

    Objawy, które możesz zauważyć1

    • The cabin temperature does not follow the value you have set

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.