VOLVO
CCM-0014 - Damper motor, floor and ventilation. Signal too high
Układ
Sterownik klimatyzacji (CCM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
5 modeliS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Co oznacza ten kod błędu?
The control module has received too strong a signal from the floor and ventilation damper motor. The fault code can be set together with other damper codes, which may point to a fault in the shared network that drives the dampers. While the fault is present the damper motor cannot be activated.
Możliwe przyczyny
- Signal wire shorted to ground
- Defective damper motor
Co możesz zrobić
- 1Read off the stored fault codes. If CCM-0014 appears with other damper codes, the network may be at fault
- 2Check the connectors and the wiring to the damper motors for chafing, crushed areas and corrosion
- 3Clear the fault codes and test drive to see whether they return
- 4With the ignition off, use a multimeter to check the signal wire for ground contact (the body). If found, have a workshop repair it
- 5If the fault remains, have a workshop decide whether the damper motor is damaged and replace it if needed
- 6If you have a diagnostic tool, follow the damper position in live data while turning the control and check that it changes smoothly
Objawy, które możesz zauważyć1
- Air flow problem
Na co może wpływać usterka1
- While the fault is present the damper motor is not activated, so airflow to the floor and vents cannot be controlled
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.