Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    CCM-006A
    VOLVO

    CCM-006A - Tunnel Control Switch 1 Internal Fault

    Układ

    Sterownik klimatyzacji (CCM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    5 modeli

    C30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

    Pokaż modele wg rocznika i silnika (5)
    • Volvo C30 (2007–2013)2008–2013
    • Volvo C30 Electric (2011–2013)2011–2013
    • Volvo C70 (2006–2013)2008–2013
    • Volvo S40 (2004–2013)2008–2012
    • Volvo V50 (2004–2013)2008–2012

    Co oznacza ten kod błędu?

    The climate control module has found an internal fault in the switch at the front of the tunnel console. The switch sends fault messages to the module, so the buttons on the tunnel console may stop working. Functions such as park assist and automatic engine start/stop can also be affected.

    Możliwe przyczyny

    • Internal fault in the switch on the front tunnel console

    Co możesz zrobić

    1. 1Check that the connector to the switch on the tunnel console is tight and clean
    2. 2Press the buttons on the tunnel console one at a time and note which ones do not respond and which functions are affected
    3. 3If you have a diagnostic tool: read the status of the front tunnel console switch in live data. The status should change when the buttons are pressed and released
    4. 4Clear the code and test drive the car to see whether the buttons and park assist work again. If the fault is intermittent it may return later
    5. 5If the fault remains, have a workshop replace the front tunnel console switch

    Objawy, które możesz zauważyć4

    • The buttons on the keypad do not work
    • Front and rear park assist does not work
    • Blind spot warning (BLIS) is not functioning
    • Automatic engine start/stop does not work, either while driving or at idle

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.