VOLVO
CCM-B102F4A - Auxiliary Switch. System Internal Failures. Incorrect component installed
Układ
Sterownik klimatyzacji (CCM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Co oznacza ten kod błędu?
The climate control module (CCM) checks the buttons in the bottom row of the keypad and has found a button that has no entry in the vehicle configuration file. The fault comes from an incorrect vehicle configuration, which is corrected by programming rather than by replacing a working part.
Możliwe przyczyny
- The vehicle configuration is incorrect
Co możesz zrobić
- 1Read off and clear the fault code, then check whether it returns
- 2Check that the connectors to the climate panel are firmly seated and free from oxidation
- 3With diagnostic equipment, read the status of the bottom-row buttons and compare them with the buttons fitted to the climate panel
- 4Check that the bottom-row buttons match the equipment fitted to the vehicle, as a button missing from the configuration causes the fault
- 5Have a workshop load updated software into the CEM, then into the climate control module (CCM), as the fault is corrected by programming
- 6After the repair, check that the climate system works and that the fault code does not return
Objawy, które możesz zauważyć5
- The lower row of buttons on the climate unit does not work
- Buttons and controls on the centre console for climate work fully or partly incorrectly
- The lane departure warning does not work
- City Safety does not work
- The blind spot system (BLIS) is not working
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.