VOLVO
CCM-B108677 - Air Distribution Damper Motor. Mechanical Failures. Commanded position not reachable
Układ
Sterownik klimatyzacji (CCM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Co oznacza ten kod błędu?
The climate control module (CCM) has registered a wrong step count between the two end positions of the air distribution damper motor. The damper therefore does not reach the correct position when controlled. This can be caused by a blocked damper or by the climate system being calibrated at the wrong temperature.
Możliwe przyczyny
- Blocked damper
- Climate system calibrated at the wrong temperature
- Internal fault in the air distribution damper motor or its control module
Co możesz zrobić
- 1Check that the damper motor sits correctly in place
- 2Check that the damper is not blocked or stuck, for example by a screw, a cable or a foam rubber gasket
- 3Read and clear the code, then road test the car to see whether it returns
- 4If the fault remains, have a workshop calibrate the climate control module with diagnostic equipment
- 5If the fault returns after calibration, activate the damper motor with a diagnostic tool and check that it moves
Objawy, które możesz zauważyć5
- Mist on the windows and/or the outside mirrors
- Airflow does not work as it should
- Temperature control or air conditioning does not work
- Windscreen defog or defrost does not work
- Side window defog or defrost does not work
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.