VOLVO
CCM-B108883 - LIN Bus B. Bus Signal / Message Failures. Value of signal protection calculation incorrect
Układ
Sterownik klimatyzacji (CCM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Co oznacza ten kod błędu?
The climate control module (CCM) has received a checksum in a message on LIN bus 2 that does not match, or found that two nodes share the same ID. This means the signal from a component on the bus is not correct. The cause may be interference or two components with the same ID.
Możliwe przyczyny
- Communication interference
- Two LIN nodes with the same ID are installed in the car
Co możesz zrobić
- 1Check that the right side damper motors and the defog damper sit in the positions their IDs indicate
- 2Check that the right side seat heating modules are correctly placed
- 3Has a damper motor recently been replaced? If so, check that it is fitted in the right place
- 4Clear the code and road test the car to see whether it returns
- 5If you have a diagnostic tool, read the IDs of the connected control modules and check that each matches its position
Objawy, które możesz zauważyć5
- Mist on the windows and/or the outside mirrors
- Poor heating in the cabin
- Front seat heating does not operate
- Rear seat heating does not operate
- Windscreen defog or defrost does not work
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.