VOLVO
CEM-2E02 - Relay, horn Signal too high
Układ
Centralny moduł elektroniczny (CEM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
5 modeliC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Co oznacza ten kod błędu?
The CEM has registered that the horn relay is short-circuited to supply voltage. The horn does not work in this case. The fault is most often caused by a broken relay.
Możliwe przyczyny
- A damaged relay
Co możesz zrobić
- 1Check the horn fuse in the engine bay fusebox. If it has blown, replace it once
- 2Replace the horn relay with an identical one. If the horn then works, the old relay was probably faulty
- 3Check that the connectors at the relay and at the CEM are seated and not corroded
- 4With the relay removed, use a multimeter to check that the horn wire has no short to supply voltage
- 5After the work, test the horn and check that the code does not return
Objawy, które możesz zauważyć1
- The horn does not work
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.