Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    CEM-6C30
    VOLVO

    CEM-6C30 - Siren. Internal fault

    Układ

    Centralny moduł elektroniczny (CEM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    5 modeli

    C30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

    Pokaż modele wg rocznika i silnika (10)
    • Volvo C30 (2007–2013)2007–2011
    • Volvo C30 (2007–2013)2012Wszystkie silniki oprócz: D4162T, D5204T, D5204T5
    • Volvo C30 (2007–2013)2013Tylko silnik: B4204S3, B4204S4, B5254T7
    • Volvo C30 Electric (2011–2013)2011–2013
    • Volvo C70 (2006–2013)2006–2011
    • Volvo C70 (2006–2013)2012–2013Tylko silnik: B5254T7
    • Volvo S40 (2004–2013)2004–2010
    • Volvo S40 (2004–2013)2011–2012Wszystkie silniki oprócz: D4162T, D5204T, D5204T5
    • Volvo V50 (2004–2013)2004–2010
    • Volvo V50 (2004–2013)2011–2012Wszystkie silniki oprócz: D4162T, D5204T, D5204T5

    Co oznacza ten kod błędu?

    The CEM has been told that the siren control module has registered an internal fault, or that the vehicle battery has been discharged. The alarm may then fail to start when needed. The cause may be a damaged fuse, an internal fault in the siren or too low voltage in the battery or in the siren's internal battery.

    Możliwe przyczyny

    • Damaged fuse
    • Internal fault in the siren control module
    • Battery voltage too low
    • Too low voltage in the siren's internal battery

    Co możesz zrobić

    1. 1Check that the vehicle battery is correctly charged, and charge it if needed
    2. 2Close all doors, lock the car with the remote control and then unlock it again
    3. 3Clear the fault code and read it again to see whether it is still present
    4. 4Check that the fuse for the alarm is intact and replace it if it has blown
    5. 5If the fault keeps returning, the siren may need replacing, which a workshop should do

    Objawy, które możesz zauważyć3

    • Alarm does not start
    • No visible or audible signal from the alarm
    • Warning symbol and text message in the display

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.