VOLVO
CEM-6C47 - Steering column lock module (SCL). Faulty signal
Układ
Centralny moduł elektroniczny (CEM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
5 modeliC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Co oznacza ten kod błędu?
The steering column lock is checked by its control module. The CEM supplies power to that module and sends locking and unlocking commands, and at the start of each sequence the module reports the lock cylinder position to the CEM. The fault code is set when the module indicates that the status switch for the lock cylinder is faulty. It is part of a larger fault-tracing for the symptom that the starter motor does not turn.
Możliwe przyczyny
- Faulty status switch for the lock cylinder
Co możesz zrobić
- 1If the starter motor does not turn, troubleshoot the starting system first, for example the battery and fuses
- 2Function test: take the key out and check that the steering column lock locks and the wheel cannot be turned; insert the key and check that it releases
- 3If you have a diagnostic tool, read the steering lock status in live data while locking and unlocking with the key, and check that the status changes
- 4If the steering column lock does not work as it should, a workshop should replace the control module
Objawy, które możesz zauważyć1
- Starter motor does not operate
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.