Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    CEM-6C49
    VOLVO

    CEM-6C49 - Transponder communication. Faulty signal. Intermittent fault

    Układ

    Centralny moduł elektroniczny (CEM)

    Modele Volvo, których dotyczy ten kod błędu

    Ten kod błędu ma różne znaczenie w zależności od modelu, rocznika lub silnika. Wybierz znaczenie, które dotyczy Twojego samochodu.

    Dotyczy następujących modeli:

    5 modeli

    S60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

    Pokaż modele wg rocznika i silnika (5)
    • Volvo S60 (2001–2009)2001–2004
    • Volvo S80 (1999–2006)1999–2004
    • Volvo V70 (2000–2008)2000–2004
    • Volvo V70 XC / XC70 (2001–2007)2001–2004
    • Volvo XC90 (2003–)2003–2004

    Co oznacza ten kod błędu?

    When the ignition is switched on, the CEM reads the transponder. The fault code is set if the transponder answers with a known code but another part of the transponder communication is wrong or fails. The fault is intermittent, so it may have occurred earlier without being active now. Several keys or other transponders placed too close to the antenna can cause it, and then the engine does not start.

    Możliwe przyczyny

    • Several keys are close together, so several transponder codes are read at once
    • A door key with an electronic chip sat too close to the antenna during reading
    • An automatic toll transponder was fitted too close to the antenna unit
    • Strong electrical interference during the start-up communication
    • The key is for another vehicle, and its security code does not match this car

    Co możesz zrobić

    1. 1Check that keys on the same ring hang freely and do not touch the key in use, and that no other transponder is near the ignition switch
    2. 2Check that the colour marking on the key head is grey or red; black or blue means a different Volvo model
    3. 3Try the same key a few more times, taking it out of the ignition switch for two seconds or more between attempts
    4. 4Clear the fault code and road test the car to see whether it returns
    5. 5If the key is faulty, a workshop should order and program a new one

    Objawy, które możesz zauważyć1

    • The engine does not start

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.