VOLVO
CEM-8A07 - Dipped headlamp relay. Signal missing. Intermittent fault
Układ
Centralny moduł elektroniczny (CEM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
5 modeliS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Co oznacza ten kod błędu?
The dipped beam relay must not be activated for this code to be set. CEM then registers that the dipped beam circuit is not closed, meaning there is a break. The fault is intermittent and may have occurred earlier without being active now.
Możliwe przyczyny
- Open circuit in the dipped beam relay circuit
Co możesz zrobić
- 1Check that the dipped beam relay is correctly fitted and that its contacts are not corroded
- 2Check the connections to the relay for chafing, loose connections and corrosion
- 3Use a multimeter to check that the wire to the relay has no break
- 4Remedy what is found and check that the dipped beam works again
Objawy, które możesz zauważyć1
- Front lamps do not work
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.