Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    CEM-8A31
    VOLVO

    CEM-8A31 - Daytime running lamps, right. Faulty signal

    Układ

    Centralny moduł elektroniczny (CEM)

    Modele Volvo, których dotyczy ten kod błędu

    Ten kod błędu ma różne znaczenie w zależności od modelu, rocznika lub silnika. Wybierz znaczenie, które dotyczy Twojego samochodu.

    Dotyczy następujących modeli:

    5 modeli

    S60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

    Pokaż modele wg rocznika i silnika (5)
    • Volvo S60 (2001–2009)2005–2009
    • Volvo S80 (1999–2006)2005–2006
    • Volvo V70 (2000–2008)2005–2008
    • Volvo V70 XC / XC70 (2001–2007)2005–2007
    • Volvo XC90 (2003–)2005–2015

    Co oznacza ten kod błędu?

    The CEM feeds the right-hand daytime running lamp from its own output. If the current drawn on that output is too high, the signal wire to the daytime running lamp is probably in contact with ground, and the output is then switched off after repeated faults until the code is cleared.

    Możliwe przyczyny

    • The signal wire to the daytime running lamp is short-circuited to ground

    Co możesz zrobić

    1. 1Check that the daytime running lamp fuse is intact and that the lamp is firmly seated in its holder
    2. 2With the ignition off and the connector to the CEM unplugged, use a multimeter to check that the right daytime running lamp wire has no contact with ground (the body)
    3. 3Look for chafing and pinched areas on the wire, especially at the headlamp and where it enters the wiring harness
    4. 4Clear the code and start the car to see whether the fault comes back
    5. 5If the fault comes back, have a workshop with diagnostic equipment check the wiring and the module

    Objawy, które możesz zauważyć1

    • The daytime running lamp does not work

    Na co może wpływać usterka1

    • The output to the right daytime running lamp is switched off permanently after repeated faults, until the code is cleared

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.