VOLVO
CEM-B100B86 - External receiver. Bus Signal / Message Failures. Signal invalid
Układ
Centralny moduł elektroniczny (CEM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
2 modeleV40 (2013–), V40 Cross Country (2013–)
Pokaż modele wg rocznika i silnika (2)
Co oznacza ten kod błędu?
The central electronic module (CEM) communicates with the remote receiver (RRX) every time the ignition is switched on. The fault code is stored when that communication is incorrect. The remote control may then stop working and the tyre pressure monitoring may show faults.
Możliwe przyczyny
- Contact resistance, oxidation or loose connections in connectors or joints
- Internal fault in the remote receiver (RRX)
Co możesz zrobić
- 1Check the connectors and wiring to the remote receiver for oxidation and loose connections, and gently move the wiring with the ignition on
- 2Test the remote control by locking and unlocking the car. If it still fails after the connectors are checked, the fault is probably still present
- 3With the ignition off, use a multimeter to check whether the wires to the remote receiver have contact with earth or voltage
- 4Clear the fault code and road test to see whether it returns
- 5If the fault remains, have a workshop check the communication and the remote receiver, since this needs diagnostic equipment
Objawy, które możesz zauważyć2
- The remote control does not work
- Tyre pressure monitoring warning lights and chimes do not show the correct status
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.