CEM-B102483
VOLVO
CEM-B102483 - Start control unit. Bus Signal / Message Failures. Value of signal protection calculation incorrect
Układ
Centralny moduł elektroniczny (CEM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
2 modeleV40 (2013–), V40 Cross Country (2013–)
Pokaż modele wg rocznika i silnika (2)
Co oznacza ten kod błędu?
The central electronic module (CEM) and the ignition lock antenna unit (IAU) share a LIN bus. The fault code is stored when the message from the left steering wheel buttons (SWSL) becomes incorrect on the bus, which can disturb starting and the function of the ignition lock.
Możliwe przyczyny
- Contact resistance, oxidation or loose connections in connectors or joints
- Damaged ignition lock antenna unit (IAU)
Co możesz zrobić
- 1Check the connectors at the left steering wheel buttons and at the antenna unit for oxidation and loose connections, and gently move the wiring with the ignition on
- 2Check that the left-hand steering wheel buttons do not stick or are damaged
- 3With a diagnostic tool, check for another fault code ending in 86 or 88 in the same control unit; it points to the bus and should be dealt with first
- 4Clear the fault code and road test. If it returns, have a workshop check the antenna unit
Objawy, które możesz zauważyć3
- The starter motor does not turn over, and there is no click when starting is attempted
- The engine does not start, or starts only unreliably
- Amber warning symbol and text message in the display
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.