VOLVO
CEM-B102581 - Transponder. Bus Signal / Message Failures. Invalid serial data received
Układ
Centralny moduł elektroniczny (CEM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Co oznacza ten kod błędu?
When the key is read at start-up, the ignition lock control unit (SCU) hands the key data over to the central electronic module (CEM). The fault code is stored when the key ID cannot be approved or the information cannot be interpreted. The engine then does not start.
Możliwe przyczyny
- The key ID cannot be validated
- The information from the remote key cannot be interpreted correctly
Co możesz zrobić
- 1Try a different key that belongs to the car. If it works, a workshop can add the key that does not work
- 2If none of the keys work, the ignition lock control unit or the antenna unit is probably faulty, and a workshop needs to replace it
- 3Check that the key is not damaged, for example by moisture or a knock
- 4Clear the fault code and road test to see whether it returns
Objawy, które możesz zauważyć4
- The starter motor does not turn over
- A message appears in the information display
- The engine does not start, or starts only unreliably
- The immobiliser warning light does not show the correct status
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.