Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    CEM-B109B15
    VOLVO

    CEM-B109B15 - License Plate Light. General Electrical Failures. Circuit short to battery or open

    Układ

    Centralny moduł elektroniczny (CEM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    9 modeli

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Pokaż modele wg rocznika i silnika (9)
    • Volvo S60 (2011–)2011–2015
    • Volvo S80 (2007–)2010–2015
    • Volvo V40 (2013–)2013–2015
    • Volvo V40 Cross Country (2013–)2013–2015
    • Volvo V60 (2011–)2011–2015
    • Volvo V60 Cross Country (2015–)2015
    • Volvo V70 (2008–)2010–2015
    • Volvo XC60 (2009–)2010–2015
    • Volvo XC70 (2008–)2010–2015

    Co oznacza ten kod błędu?

    The central electronic module (CEM) supplies the number plate lighting and monitors the output. The fault shows that the signal from the output is too high, which can be caused by a short to voltage or a break in the wiring.

    Możliwe przyczyny

    • Contact resistance, oxidation or a loose connection in the connections
    • Break in the signal wire
    • The signal wire is shorted to voltage
    • The supply wire is shorted to voltage

    Co możesz zrobić

    1. 1Clear the code and check whether it returns when the number plate light is switched on
    2. 2Check that the fuse for the number plate lighting is intact
    3. 3Check that the connectors at the lamp are fully engaged and not corroded
    4. 4Use a multimeter (ignition off, connector unplugged) to check that the wire is not at battery voltage and has no break
    5. 5If you have a diagnostic tool, activate the number plate lighting with the tool and check whether it comes on
    6. 6If the fault remains, have a workshop check the wiring and the lamp

    Objawy, które możesz zauważyć1

    • The number plate lighting does not work

    Na co może wpływać usterka2

    • The function is switched off permanently after several operating cycles in which the fault was detected
    • Clearing the fault codes resets the output

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.