VOLVO
CEM-B10AD04 - Rain sensor. General Failure Information. System Internal Failures
Układ
Centralny moduł elektroniczny (CEM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Co oznacza ten kod błędu?
The CEM communicates with the rain sensor. The fault shows that one of the rain sensor's internal components is not working, so the automatic windscreen wiping cannot be controlled correctly.
Możliwe przyczyny
- Damaged rain sensor
- The rain sensor is not firmly attached to the glass
- Crack in the glass near the rain sensor
- Stone chip in the glass near the rain sensor
Co możesz zrobić
- 1Read off and note the code, clear it and check whether it returns when you drive with the rain sensor active
- 2Check that the rain sensor is firmly attached to the glass and has good contact with both the glass and its cushion
- 3Look for cracks or stone chips in the glass near the rain sensor
- 4Check that the fuses for the windscreen wipers are intact
- 5If the fault remains, have a workshop check or replace the rain sensor
Objawy, które możesz zauważyć2
- The rain sensor does not work
- The automatic windscreen wipers do not work
Na co może wpływać usterka1
- If the fault occurs a while after the rain sensor is activated, the wipers go to top speed
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.