VOLVO
CEM-B10D794 - PATS Key. Component Failures. Unexpected operation
Układ
Centralny moduł elektroniczny (CEM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
4 modeleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (4)
Co oznacza ten kod błędu?
Once the remote key has been put into the ignition lock, the ignition lock control module tries to identify the key by reading its ID from the transponder. When that read-out fails to finish in time, the module reports that the key does not respond and the code is stored. The fault shows up as the starter motor not working and a message in the text display.
Możliwe przyczyny
- The remote key does not respond to the control module's request
- Another remote key or transponder nearby disturbs the communication
- Something, for example a finger, has been inserted into the starter module
Co możesz zrobić
- 1Check that no other key or transponder is near the ignition lock when you start, for example another key bunch
- 2Check that nothing has been inserted into the starter module
- 3Try starting with another key that belongs to the car. If it works, the key that does not respond is probably the one at fault
- 4If the fault follows one key: have a workshop reprogram that key
- 5If none of the keys work: have a workshop with diagnostic equipment check the ignition lock control module
Objawy, które możesz zauważyć2
- Starter motor does not operate
- Message in the text display
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.