VOLVO
CEM-B10E611 - Front Side Marker Light. General Electrical Failures. Circuit short to ground
Układ
Centralny moduł elektroniczny (CEM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
2 modeleV40 (2013–), V40 Cross Country (2013–)
Pokaż modele wg rocznika i silnika (2)
Co oznacza ten kod błędu?
On cars with xenon dipped beams, the CEM powers the front side marker lights through a common output. The code is stored when the signal from the output is too low, which can be caused by the supply cable being short-circuited to ground. The side marker lights then do not work.
Możliwe przyczyny
- The supply cable is short-circuited to ground
Co możesz zrobić
- 1Check that the relevant fuses are intact. Their locations are in the owner's manual or on the fuse box cover
- 2Check that the side marker lamps are secure and that their connectors are clean and dry
- 3Look for chafing on the supply cable, especially where it may have been pinched against the body
- 4Use a multimeter to check that the supply cable to the side marker lights has no contact with ground (the body)
- 5If you have a diagnostic tool: activate the front side marker lights and check that they light
- 6If the fault returns, have a workshop with diagnostic equipment check the control module output and the wiring
Objawy, które możesz zauważyć3
- Side marker lights or position lights do not work
- Yellow warning symbol and text message in the display
- The bulb failure warning in the instruments comes on or behaves abnormally
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.