VOLVO
CEM-B10EC77 - Passenger door double locking motor. Mechanical Failures. Commanded position not reachable
Układ
Centralny moduł elektroniczny (CEM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
7 modeliS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Co oznacza ten kod błędu?
The CEM handles locking and unlocking of the door lock motors and receives the lock motor position over the CAN network from the door control modules. The code is stored when no confirmation comes back from the passenger door module that the deadlock motor has reached the correct position after locking or unlocking. The passenger door then does not lock as it should.
Możliwe przyczyny
- Lost signal exchange with the passenger door module (PDM)
Co możesz zrobić
- 1If you have a diagnostic tool: read the fault codes in the driver and passenger door modules (DDM and PDM) and note them
- 2Test locking a few times with the remote or the central locking button. Repeated locking heats the motors, so pause between rounds
- 3Activate the deadlock and check whether every door gives a clicking lock sound. If only the passenger door is silent, suspect its lock or wiring
- 4Look for chafing and loose connectors in the cable between the passenger door module and the lock. The door trim must come off, so have a workshop check
- 5If the fault returns, have a workshop with diagnostic equipment check the module and update its software or replace the lock motor
Objawy, które możesz zauważyć1
- Passenger door will not lock or unlock when activated and deactivated
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.