Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    CEM-B10EF12
    VOLVO

    CEM-B10EF12 - Sunroof speed output. General Electrical Failures. Circuit short to battery

    Układ

    Centralny moduł elektroniczny (CEM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    7 modeli

    S60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Pokaż modele wg rocznika i silnika (7)
    • Volvo S60 (2011–)2011–2015
    • Volvo S80 (2007–)2007–2015
    • Volvo V60 (2011–)2011–2015
    • Volvo V60 Cross Country (2015–)2015
    • Volvo V70 (2008–)2008–2015
    • Volvo XC60 (2009–)2009–2015
    • Volvo XC70 (2008–)2008–2015

    Co oznacza ten kod błędu?

    The CEM talks to the sun roof module (SRM) and monitors the speed signal sent to it. The code is stored when the speed signal circuit for the sunroof is too high, which is caused by the signal cable touching supply voltage. The automatic closing of the sunroof then does not work. The code can also be stored in cars without a sunroof, since the speed signal is also used for other functions, such as the taximeter in taxis.

    Możliwe przyczyny

    • The signal cable touches supply voltage

    Co możesz zrobić

    1. 1Check that the relevant fuses are intact. Their locations are in the owner's manual or on the fuse box cover
    2. 2Read and note the code, clear it and road test the car to see whether it returns
    3. 3Look for chafing on the cable to the sunroof and check that the connectors are secure
    4. 4If you have a diagnostic tool: check in live data that the speed value follows the speedometer while driving
    5. 5If the fault returns, have a workshop with diagnostic equipment check the wiring and the control module

    Objawy, które możesz zauważyć1

    • Auto-close function of the sunroof does not work

    Na co może wpływać usterka3

    • The output switches off in the driving cycle in which the fault is detected
    • If the fault remains, the output switches off permanently after 100 driving cycles
    • Clearing the fault codes and starting a new driving cycle resets the output

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.