Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    CEM-B10F401
    VOLVO

    CEM-B10F401 - Right front position light. General Failure Information. No sub type information

    Układ

    Centralny moduł elektroniczny (CEM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    4 modele

    S80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Pokaż modele wg rocznika i silnika (4)
    • Volvo S80 (2007–)2007–2010
    • Volvo V70 (2008–)2008–2010
    • Volvo XC60 (2009–)2009–2010
    • Volvo XC70 (2008–)2008–2010

    Co oznacza ten kod błędu?

    The CEM feeds the right front position light directly from an output. The code is stored when the supply cable has a break or is shorted to ground. The right front position light then does not work.

    Możliwe przyczyny

    • The supply cable is short-circuited to ground
    • Open circuit in the supply cable

    Co możesz zrobić

    1. 1Check that the relevant fuses are intact. Their locations are in the owner's manual or on the fuse box cover
    2. 2Check that the lamp is secure and that the connectors in the lamp housing are clean and dry
    3. 3Look for chafing and pinch damage on the supply cable to the right front position light
    4. 4Use a multimeter to check that the supply cable has no contact with ground (the body)
    5. 5Use a multimeter to check that the supply cable is not broken
    6. 6If the fault returns, have a workshop with diagnostic equipment check the control module output and the wiring

    Objawy, które możesz zauważyć1

    • Right front position light does not work

    Na co może wpływać usterka3

    • The output switches off in the driving cycle in which the fault is detected
    • If the fault remains, the output switches off permanently after 100 driving cycles
    • Clearing the fault codes and starting a new driving cycle resets the output

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.