VOLVO
CEM-B110114 - Comfort relay. General Electrical Failures. Circuit short to ground or open
Układ
Centralny moduł elektroniczny (CEM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Co oznacza ten kod błędu?
The CEM controls the relay coil output for the comfort relay. The code is stored when the signal from that output is too low. The code never appears on its own, so start with the other CEM codes. The fault shows up as poor airflow, no recirculation and poor air quality in the cabin, and the battery may drain.
Możliwe przyczyny
- Damaged relay
- Relay driver circuit short-circuited to ground
- Open circuit in the relay coil
- Break in the signal cable to the relay driver circuit
Co możesz zrobić
- 1Start with the other fault codes in the CEM, since this code never appears on its own
- 2Check that the relevant fuses are intact. Their locations are in the owner's manual or on the fuse box cover
- 3Look for chafing and pinch damage on the wiring to the relay and check that the connectors are secure and not corroded
- 4Use a multimeter to check that the wire to the relay coil has no contact with ground (the body) and is not broken
- 5If you have a diagnostic tool: activate the relay and listen for it to click
- 6If the fault returns, have a workshop with diagnostic equipment check the relay and the wiring
Objawy, które możesz zauważyć4
- Air flow does not work as it should
- No air recirculation
- Poor air quality in the cabin
- The battery discharges
Na co może wpływać usterka2
- After 100 driving cycles with the fault, the function switches off permanently
- Clearing the fault codes resets the output
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.