VOLVO
CEM-B112B83 - Steering wheel module. Bus Signal / Message Failures. Value of signal protection calculation incorrect
Układ
Centralny moduł elektroniczny (CEM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
2 modeleV40 (2013–), V40 Cross Country (2013–)
Pokaż modele wg rocznika i silnika (2)
Co oznacza ten kod błędu?
The CEM talks to the steering wheel module (SWM) over a shared LIN bus. The code is stored when a message from the SWM on that bus arrives incorrect. The turn signals, wipers, washer and trip computer may then work poorly.
Możliwe przyczyny
- Poor contact, oxidation or looseness in the connectors or connections
- Damaged steering wheel module (SWM)
Co możesz zrobić
- 1With a diagnostic tool, check for other CEM codes ending in 86 or 88 and fix those first, as they point to the LIN bus
- 2Check that the connectors in the steering wheel and the connections to the steering wheel module are secure and free from oxidation
- 3Check that the relevant fuses are intact. Their locations are in the owner's manual or on the fuse box cover
- 4If you have a diagnostic tool: read the steering wheel module status in live data and check that it responds
- 5If the fault returns, have a workshop with diagnostic equipment check the LIN bus and the steering wheel module, and download new software if needed
Objawy, które możesz zauważyć5
- Windshield washer does not work
- Trip computer has other problems
- Rear turn signal does not work
- Front turn signal does not work
- Windshield wiper does not work
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.