CEM-B13BD09
VOLVO
CEM-B13BD09 - Steering Wheel Heater Module. General Failure Information. Component Failures
Układ
Centralny moduł elektroniczny (CEM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
7 modeliS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Co oznacza ten kod błędu?
The CEM supplies the steering wheel heater control module (HSWM) through a relay. The steering wheel control module (SWM) measures the temperature in the wheel and sends a diagnostic signal to the CEM when it detects a fault in the steering wheel heating system, and the fault code is then set. The fault may lie in the HSWM, in the steering wheel control module, in the wiring between them, or in the heating element in the rim.
Możliwe przyczyny
- Internal fault in the steering wheel heater control module (HSWM)
- No power supply to the steering wheel heater control module (HSWM)
- Internal fault in the steering wheel control module (SWM)
- Fault on the private LIN bus between the steering wheel control module and the steering wheel heater control module
- The heating element in the rim is short-circuited or open
- The signal wire to the temperature sensor in the rim is short-circuited or open
Co możesz zrobić
- 1If you have a diagnostic tool, read the freeze frame data of the fault code and note which fault is indicated
- 2Check the fuse for the steering wheel heater and that the relay supplies the steering wheel heater control module
- 3Check the wiring between the steering wheel control module and the steering wheel heater control module for breaks, chafing and loose connectors
- 4With the connectors disconnected, use a multimeter to check that the heating element wires are intact and not short-circuited
- 5If no fault is found, have a workshop check the steering wheel control module and the heater control module, as one of them will probably need replacing
Objawy, które możesz zauważyć1
- The steering wheel heater does not work
Na co może wpływać usterka2
- The steering wheel heater switches off for the rest of the current driving cycle
- After several driving cycles with a detected fault, the steering wheel heater is switched off permanently until the fault code has been remedied
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.