VOLVO
CEM-C1A6292 - Tire Pressure Sensor #4. Component Failures. Performance or incorrect operation
Układ
Centralny moduł elektroniczny (CEM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
2 modeleV40 (2013–), V40 Cross Country (2013–)
Pokaż modele wg rocznika i silnika (2)
Co oznacza ten kod błędu?
Earlier in the drive the control module received signals from a sensor with a particular ID number, but that sensor no longer sends anything. This concerns the tire pressure sensor at the right rear wheel. One cause given is that a tire pressure sensor intended for a different car is fitted in that wheel.
Możliwe przyczyny
- A tire pressure sensor intended for a different car is fitted
Co możesz zrobić
- 1Check that the sensor at the right rear wheel is intended for this particular car. If a sensor from another car is fitted there, change it to the correct one
- 2Clear the fault code and road test to see whether it returns
- 3A diagnostic tool shows which ID numbers are being received. If the sensor at the right rear wheel is missing from the list, it is the one to replace
- 4Troubleshoot the remote control and receiver first if they are not working, by testing locking and unlocking
- 5If the fault remains with the correct sensor fitted, replace the sensor at the right rear wheel and have a workshop activate the new one
Objawy, które możesz zauważyć2
- The tire pressure warning lamp comes on
- Text message in the display
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.