VOLVO
CEM-C1A9609 - Brake Light Switch. General Failure Information. Component Failures
Układ
Centralny moduł elektroniczny (CEM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
2 modeleV40 (2013–), V40 Cross Country (2013–)
Pokaż modele wg rocznika i silnika (2)
Co oznacza ten kod błędu?
The brake light switch sits by the brake pedal and should register when the pedal is pressed. The control module checks the switch, and the fault is logged when the switch does not respond even though brake pressure is present, on several brake applications during the same drive. The fault may be caused by a switch that is incorrectly fitted, damaged or jammed.
Możliwe przyczyny
- The brake light switch is incorrectly fitted
- The brake light switch is damaged
- The brake light switch has jammed
Co możesz zrobić
- 1Ask someone to watch the rear lights while you press the brake. If the brake lights do not come on, or stay on all the time, this matches the fault
- 2Check that the brake pedal moves freely and that the switch at the pedal is secure and undamaged
- 3Check the fuses for the brake lights and cruise control in the fuse box, using the owner's manual
- 4If you have a diagnostic tool, look at the brake switch position in live data and check that it changes when you press and release the brake
- 5If the switch is incorrectly fitted, damaged or jammed, have a workshop correct or replace it
- 6Brake lights matter to other road users, so a fault that stops them coming on under braking should be fixed promptly
Objawy, które możesz zauważyć4
- The brake lights stay on all the time or do not work
- Cruise control will not engage, does not hold the set speed or cuts out
- The engine does not start, or the start function does not work
- Text message and warning symbol in the display
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.