Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    CEM-DE6E
    VOLVO

    CEM-DE6E - Communication with the transmission control module (TCM). Signal missing

    Układ

    Centralny moduł elektroniczny (CEM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    5 modeli

    C30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

    Pokaż modele wg rocznika i silnika (5)
    • Volvo C30 (2007–2013)2007–2013
    • Volvo C30 Electric (2011–2013)2011–2013
    • Volvo C70 (2006–2013)2006–2013
    • Volvo S40 (2004–2013)2004–2012
    • Volvo V50 (2004–2013)2004–2012

    Co oznacza ten kod błędu?

    The CEM has lost contact with the transmission control module (TCM). As a result some gear changes do not happen, the malfunction indicator may light and a message can appear in the display. The fault is most often caused by supply, earth or a connector at the TCM.

    Możliwe przyczyny

    • No supply to the TCM
    • Open circuit in the earth wire to the TCM
    • Contact resistance in the connections
    • Open circuit in the LS-CAN wires to the TCM
    • The TCM does not suit the car, for example a used module with other software or hardware

    Co możesz zrobić

    1. 1Switch the ignition on and check that the light on the gear selector panel comes on. If it does not, the TCM probably has no supply
    2. 2Check the TCM fuse in the engine bay fuse box and the TCM fuse in the CEM. If one has blown, check its circuit for a short to earth before replacing it
    3. 3Use a multimeter to check that the wires from the fuse box and from the CEM to the TCM have no break
    4. 4Check the TCM earth wire and earth point for play and oxidation
    5. 5With a diagnostic tool, read the TCM ID. If it reads, the communication is probably fine and the fault may be intermittent
    6. 6After the repair, clear the fault code and road test to check that gear changes work and the fault does not return

    Objawy, które możesz zauważyć3

    • Gear changes do not happen
    • The malfunction indicator lamp is lit
    • A message appears in the text display

    Na co może wpływać usterka1

    • A substitute gear is engaged instead of the selected gear

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.