VOLVO
CEM-DF15 - CAN-H, high speed network. Signal too low
Układ
Centralny moduł elektroniczny (CEM)
Modele Volvo, których dotyczy ten kod błędu
Ten kod błędu ma różne znaczenie w zależności od modelu, rocznika lub silnika. Wybierz znaczenie, które dotyczy Twojego samochodu.
Dotyczy następujących modeli:
10 modeliC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Pokaż modele wg rocznika i silnika (10)
- Volvo C30 (2007–2013)2007–2013
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2013
- Volvo S40 (2004–2013)2004–2012
- Volvo S60 (2001–2009)2005–2009
- Volvo S80 (1999–2006)2005–2006
- Volvo V50 (2004–2013)2004–2012
- Volvo V70 (2000–2008)2005–2008
- Volvo V70 XC / XC70 (2001–2007)2005–2007
- Volvo XC90 (2003–)2005–2015
Co oznacza ten kod błędu?
The CEM detects that CAN H in the high speed network has been shorted to earth, so the signal becomes too low. The engine may then stall or fail to start. The fault most often lies in the high speed network wiring.
Możliwe przyczyny
- Short to earth on the CAN H wire in the high speed network
Co możesz zrobić
- 1If the engine will not start, check the battery and that the starter turns the engine over first. That rules out simpler causes
- 2Note when the engine stalls, for example at certain movements or after a while. This gives a clue to where the cable is damaged
- 3With a diagnostic tool, read the fault codes from all control modules and see which ones show communication faults
- 4Use a multimeter to check that the CAN H wire has no contact with earth or the body along its length
- 5Check the connectors in the high speed network for loose connections, corrosion and moisture
- 6An engine that stalls while driving is a safety problem. Do not drive far with the fault present, and have a workshop repair it promptly
Objawy, które możesz zauważyć4
- The engine does not start
- The engine stalls, including while driving
- The malfunction indicator lamp is lit
- A message appears in the text display
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.