VOLVO
CEM-P060400 - Internal Control Module Random Access Memory (RAM) Error. General Failure Information. No sub type information
Układ
Centralny moduł elektroniczny (CEM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
7 modeliS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Co oznacza ten kod błędu?
The CEM has detected a fault in its internal working memory (RAM) when the ignition is switched on. The fault is in the module itself rather than in the wiring, and the module normally has to be replaced. The code is generic and does not say which memory fault it is.
Możliwe przyczyny
- Damaged central electronic module (CEM)
Co możesz zrobić
- 1Make sure the battery is in good charge, since low voltage can cause temporary memory errors
- 2Clear the fault code and start the car. If the fault returns straight away, it is an active internal fault in the CEM
- 3With a diagnostic tool, read the CEM ID and see whether it responds. If it does not, there is a larger fault in the module
- 4Check that the earth point and supply to the CEM are secure and free from corrosion
- 5Replacing the CEM is for a workshop, which also codes the correct data into the new module
- 6After the replacement, check that the engine starts and that the fault code does not return
Objawy, które możesz zauważyć1
- The engine does not start
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.