VOLVO
CEM-P060500 - Internal Control Module Read Only Memory (ROM) Error. General Failure Information. No sub type information
Układ
Centralny moduł elektroniczny (CEM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
7 modeliS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Co oznacza ten kod błędu?
The CEM has registered an internal fault in its software, for example after a failed software upload. The engine may then not start. The fault is normally put right with new software or by replacing the module, and that is done by a workshop.
Możliwe przyczyny
- Faulty software loaded in the CEM
Co możesz zrobić
- 1Clear the fault code and start the car. If the fault returns straight away, it is an active software fault
- 2Tell the workshop if a software update was recently interrupted or failed, since that is an important clue
- 3Have a workshop read the fault codes and reload the CEM with the latest software. Programming is a workshop task
- 4If reprogramming has no effect, the CEM must be replaced, which is also a workshop task
- 5Make sure the battery is well charged during the upload, since low voltage can interrupt it
- 6After the work, check that the engine starts and that the fault code does not return
Objawy, które możesz zauważyć1
- The engine does not start
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.