VOLVO
CEM-P167400 - Control Module Software Corrupted. General Failure Information. No sub type information
Układ
Centralny moduł elektroniczny (CEM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
7 modeliS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Co oznacza ten kod błędu?
The CEM has registered a fault in its software. The code is generic and does not say more precisely what type of fault it is. The engine may then not start, and the gauges, instrument lighting and indicators can also be affected. A workshop fixes the fault with new software.
Możliwe przyczyny
- Software fault in the CEM
Co możesz zrobić
- 1Clear the fault code and start the car. If the fault returns straight away, it is an active software fault
- 2Tell the workshop if a software update was recently interrupted or failed
- 3Have a workshop read the fault codes and reload the CEM with the latest software. Programming is a workshop task
- 4Make sure the battery is well charged during the reload, since low voltage can interrupt it
- 5After the reload, check that the engine starts and the gauges work
- 6If the fault remains after the reload, the CEM must be replaced, which is also a workshop task
Objawy, które możesz zauważyć5
- The engine does not start
- No gauges work
- The instrument lighting does not work
- The turn signals do not work
- Reduced performance
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.