VOLVO
CEM-U000400 - High Speed CAN Communication Bus (+) Low. General Failure Information. No sub type information
Układ
Centralny moduł elektroniczny (CEM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
2 modeleV40 (2013–), V40 Cross Country (2013–)
Pokaż modele wg rocznika i silnika (2)
Co oznacza ten kod błędu?
On the V40 one of the high speed CAN wires, the positive wire, is shorted to earth. This disturbs communication between the control modules, so the engine may have trouble starting and driving is affected. The fault most often lies in the high speed network wiring.
Możliwe przyczyny
- Short circuit between the positive wire of the high speed CAN and earth
Co możesz zrobić
- 1Note when the faults occur, for example at start or under acceleration. This gives a clue to where the wiring is damaged
- 2Check the high speed network harness for chafing and pinch damage where it moves
- 3Check the connectors on the network for loose connections and corrosion
- 4With a diagnostic tool, read the fault codes from all control modules and see which ones show communication faults
- 5Use a multimeter to check that the wire has no contact with earth or the body along its length
- 6If the engine stalls while driving, avoid long journeys and have a workshop trace the fault promptly
Objawy, które możesz zauważyć4
- The engine does not start even though the starter turns
- Poor performance and lack of power, especially at start
- The throttle response hesitates, surges or is jerky
- The speedometer and tachometer show wrong readings
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.