VOLVO
CEM-U000500 - High Speed CAN Communication Bus (+) High. General Failure Information. No sub type information
Układ
Centralny moduł elektroniczny (CEM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
2 modeleV40 (2013–), V40 Cross Country (2013–)
Pokaż modele wg rocznika i silnika (2)
Co oznacza ten kod błędu?
On the V40 the positive wire of the high speed CAN is shorted to supply voltage, which disturbs communication between the control modules. The engine may then have trouble starting, and driving and the gauges are affected. The fault most often lies in the high speed network wiring.
Możliwe przyczyny
- Short circuit between one of the CAN wires and supply voltage
Co możesz zrobić
- 1Check whether the faults appear when the harness moves. That helps you find where the wire touches supply voltage
- 2Check the harness for chafing, pinch damage and moisture, especially at edges and grommets
- 3Check the high speed network connectors for loose connections and corrosion
- 4With a diagnostic tool, read the fault codes from all control modules. Communication faults in several modules point to a shared fault
- 5Use a multimeter to check that the positive wire has no contact with supply voltage when it should not
- 6If the engine stalls while driving, avoid long journeys and have a workshop trace the fault promptly
Objawy, które możesz zauważyć5
- The engine does not start even though the starter turns
- Poor performance and lack of power
- The throttle response hesitates or surges under acceleration
- Cruise control cannot be engaged
- The speedometer and tachometer show wrong readings
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.