VOLVO
CEM-U000800 - High Speed CAN Communication Bus (-) High. General Failure Information. No sub type information
Układ
Centralny moduł elektroniczny (CEM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
2 modeleV40 (2013–), V40 Cross Country (2013–)
Pokaż modele wg rocznika i silnika (2)
Co oznacza ten kod błędu?
On the V40 the negative wire of the high speed CAN is at supply voltage, which disturbs communication between the control modules. The engine may then have trouble starting, and driving and some gauges are affected. The code is generic and does not say more precisely what type of fault it is.
Możliwe przyczyny
- The negative wire of the high speed CAN has contact with supply voltage
Co możesz zrobić
- 1Note when the faults occur, for example at start, under acceleration or at steady speed
- 2Check the high speed harness for chafing, pinch damage and moisture
- 3Check the network connectors for loose connections and corrosion
- 4With a diagnostic tool, read the fault codes from all control modules and see which ones show communication faults
- 5Use a multimeter to check that the negative wire has no contact with supply voltage when it should not
- 6If the engine stalls while driving, avoid long journeys and have a workshop trace the fault promptly
Objawy, które możesz zauważyć4
- The engine does not start even though the starter turns
- Poor performance and lack of power
- The throttle response hesitates or is jerky
- The speedometer shows wrong readings
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.